MARSE temperature control units do not only work alongside injection moulding machines. In the plastics sector they also control the temperature of extrusion lines. A recent example: an extruder of about 70 kg/h dedicated to polyolefin production, with four MARSE temperature control units integrated directly into its base frame.

One temperature control unit per circuit, inside the machine
Each circuit of the line works with its own temperature control unit and its own setpoint. The four water units, rated up to 90 °C, were mounted in a row on the extruder's base frame: they take up no space around the line and the hoses are kept short and tidy.
Advantages for production and maintenance
- Independent control: each circuit is held at its own temperature, regardless of the others.
- Stable process: heating and cooling PID control holds the setpoint even when the line load changes.
- Controls in view: touch screen and emergency stop on the front of each unit.
- Less floor space: the temperature control units are part of the machine.
- Simple maintenance: four identical units, with common, interchangeable spare parts.
Thermoregulation for the entire plastics sector
Injection moulding, extrusion, blow moulding or thermoforming: wherever the process temperature determines part quality, MARSE water and oil temperature control units, from 30 to 300 °C, adapt to every machine and every circuit.