MARSE temperature control units in the metal industry: precision grinding of a flexographic printing drum

Contents

MARSE temperature control units don't only work alongside injection moulding machines. They are also used in the metal industry, where the temperature of the part determines the precision of the machining. One example: grinding the drum of a flexographic printing machine, where a MARSE temperature control unit keeps the part at its working temperature while it is being ground.

MARSE temperature control unit next to the grinding machine, connected to the drum of a flexographic printing machine during grinding
A MARSE temperature control unit connected to the drum of a flexographic printing machine while it is being ground.

Grinding the drum under its working conditions

The drum of a flexographic printing machine is a precision part: the material runs over it while it is printed, and its straightness, cylindricity and concentricity are measured in microns. In production, the drum does not work at room temperature, but at the temperature set by its temperature control circuit.

That is why the drum is ground under the same conditions in which it will work. During grinding, the MARSE temperature control unit circulates the fluid through the inside of the drum and keeps it at its working temperature. This way, the geometry that is measured and corrected on the grinding machine is the same geometry the part will have once it is in the machine.

Why a few degrees matter

Steel expands by about 12 microns per metre for every degree of temperature. On a drum with a diameter of one metre, a difference of just 5 °C between the grinding machine and the printing machine means about 60 microns in diameter. That difference is much larger than the tolerances targeted when grinding, and it is not necessarily spread evenly along the whole drum.

The advantages of grinding with a temperature-controlled drum are clear:

  • Real precision: the deviation in microns is corrected with the part at its working temperature, not at the temperature of the workshop.
  • A drum that stays within its dimensions: the geometry that leaves the grinding machine is the geometry the part will have in production.
  • Repeatable measurements: with a stable temperature, the measurements do not depend on the time of day or on the temperature of the shop floor.
  • Print quality: a properly ground drum ensures uniform pressure across the full width of the web.

From the workshop to the machine room

Once ground, the drum is fitted in the flexographic printing machine, and temperature control stays with it. In the machine room of the printing press, a MARSE temperature control unit keeps the drum at the same temperature at which it was ground, so the precision achieved in the workshop is maintained during production.

MARSE temperature control unit in the machine room of a flexographic printing press, keeping the drum at its working temperature
The MARSE temperature control unit, now in the machine room of the flexographic printing press, keeps the drum at its working temperature.

It is the same idea we apply to other printing and laminating lines, where MARSE temperature control units are integrated into the main machine to control the temperature of each roller.

MARSE temperature control units in the metal industry

Precision grinding is just one example. In the metal industry, our temperature control units also control the temperature of moulds in die casting and of parts, tooling and machines that need a stable temperature to hold their dimensions. For this we offer:

  • PID heating and cooling control with auto-tuning, for a stable temperature.
  • Water or oil, from 90 to 300 °C, depending on the application.
  • Real-time graphs of temperature, pressure and flow, with alarms.
  • Connectivity with the machine and with the plant.

Discover the full range of MARSE industrial temperature control units.

Frequently asked questions

What is a temperature control unit used for when grinding a drum?

To keep the drum at its working temperature while it is being ground. This way, its geometry is corrected under the same conditions in which it will work in the machine.

How much does a steel drum expand with temperature?

About 12 microns per metre and per degree. On a drum with a diameter of one metre, a difference of 5 °C means about 60 microns in diameter.

Are MARSE temperature control units used in the metal industry?

Yes. In addition to precision grinding, they control the temperature of moulds in die casting and of parts, tooling and machines that need a stable temperature.

Do you have a machining or grinding process in which temperature affects the dimensions? Contact us and we will help you define the right solution.

MARSE temperature control units in the metal industry: precision grinding of a flexographic printing drum

Equipment with marking EC · European conformity
MARSE
Privacy Summary

This website uses cookies to offer you the best possible user experience. Cookie information is stored in your browser and performs functions such as recognizing you when you return to the website and helping the computer understand which sections of the website you find most interesting and useful.