Home›Success stories›Jacketed reactors of up to 2,000 l with 3 bar jackets
Chemistry and pharmacy

Temperature control units for jacketed reactors: from small reactors to more than 2,000 litres

Chemical reactor jackets usually withstand a maximum of about 3 bar. MARSE controls temperature and pressure in jacketed reactors from small units up to production reactors of more than 2,000 litres, with water or oil, from low temperatures up to 300 °C.

SectorChemicals · hot melt production
Jacket
≈ 3 barusual maximum pressure
Volume
> 2,000 lproduction reactors
Temperature
Up to 300°Cfrom low temperatures
Fluid
Water or oildepending on the process
Atemperador MARSE conectado a un reactor químico encamisado
Production jacketed reactor with a MARSE temperature control unit.

The case at a glance

Jacket pressure
Usual maximum of about 3 bar.
Volume
From small reactors to more than 2,000 litres.
Temperature
From low temperatures up to 300 °C.
Fluid
Water or oil, depending on the process.
Pressure kit
Pump with frequency inverter, expansion vessel and air vents.

The process and the initial problem

A jacketed or glass-lined reactor has to follow the temperature profile of each batch: heat to start the reaction, hold, and cool when the reaction releases heat. All of this without exceeding the maximum jacket pressure, which in many reactors is around 3 bar.

Pressure peaks occur during abrupt start-ups, valve hammer or when cold oil is circulated. A pressure surge can damage the glass lining or deform the jacket. That is why, in addition to temperature, the temperature control unit has to manage pressure.

Challenge and solution

A pressure surge can crack the glass lining or deform the jacket.

The challenge
  • Heat to start the reaction and cool when it releases heat
  • Never exceed the maximum jacket pressure
  • Peaks caused by valve hammer, abrupt start-ups or cold oil
The solution
  • Pump with frequency inverter that holds a pressure setpoint
  • Expansion vessel and automatic air vents
  • Batch curve followed without overshoot

Why a MARSE temperature control unit in this case

For the process engineer

  • Heating and cooling PID with ramps: the batch curve without overshoot.
  • Range from low temperatures up to 300 °C, with water or oil.
  • Experience with laboratory reactors and production reactors of more than 2,000 litres.
  • Logging of temperature, pressure and flow for each batch.

For the maintenance manager

  • Pressure kit: pump with frequency inverter that holds a pressure setpoint.
  • Expansion vessel and automatic air vents.
  • Soft start-ups: no pressure surges that shorten the life of the reactor.
  • Magnetic pump without mechanical seal from 140 °C.

Technical keys

  1. Respecting the 3 barJacket pressure always below its maximum.
  2. From small to very largeUp to production reactors of more than 2,000 litres.
  3. The full rangeFrom low temperatures up to 300 °C.
  4. No pressure surgesPump with frequency inverter, expansion vessel and air vents.

Result

Soft start-upsNo pressure peaks in the jacket.
Longer reactor service lifeLess risk of breakdowns and stoppages.
Consistent batchesThe same curve, batch after batch.

Frequently asked questions

What pressure can a reactor jacket withstand?

In many jacketed reactors the maximum is around 3 bar. The temperature control unit must always work below that value.

What size of reactor can a MARSE temperature control unit handle?

From small reactors up to production reactors of more than 2,000 litres.

How are pressure surges avoided?

With a pressure kit: pump with frequency inverter, expansion vessel and automatic air vents, plus controlled temperature ramps.

Equipment and technology

Other success stories

← All success stories
Do you have a similar process?Tell us what you need to solve and we will propose the right unit.
Talk to a specialist

Temperature control units for jacketed reactors: from small reactors to more than 2,000 litres

Equipment with marking EC · European conformity
MARSE
Privacy Summary

This website uses cookies to offer you the best possible user experience. Cookie information is stored in your browser and performs functions such as recognizing you when you return to the website and helping the computer understand which sections of the website you find most interesting and useful.