More than 100 standardised MARSE temperature control units in a plastic injection moulding plant
A plastic injection moulding plant works with more than a hundred MARSE direct-cooling and tank temperature control units. After more than 15 years of working together, the installed base has recently been renewed, once again with MARSE.
- Units
- 100+temperature control units in service
- Relationship
- More than 15 yearswith the same customer
- Technologies
- Direct and tankdirect-cooling and tank units
- Installed base
- Renewedrecently

The case at a glance
- Units
- More than 100 MARSE temperature control units.
- Technologies
- Direct-cooling and tank units.
- Relationship
- More than 15 years with the same customer.
- Status
- Installed base recently renewed.
Why standardise the temperature control units of a plant
In an injection moulding plant, each mould needs its own temperature and each injection moulding machine its own temperature control unit. When units from several manufacturers coexist, each one has its own operation, its own spare parts and its own typical faults.
Standardising on a single manufacturer simplifies the work of process and maintenance teams: the same parameters, the same way of operating and the same spare parts on every machine. This customer did so with MARSE and, when renewing the installed base, chose MARSE again.
How the installation has grown
From a first unit to the whole plant.

- A first temperature control unit that delivered what was promised
- A second unit shortly afterwards
- Expansion machine by machine


- More than 100 units, one per mould
- The same unit for all staff
- Common spare parts and the same planned maintenance on every machine
Why MARSE temperature control units in this case
For the process engineer
- Direct cooling or tank unit, depending on what each mould needs.
- The same way of setting and reading temperature on every machine.
- Repeatable mould temperatures: stable cycles and parts within tolerance.
For the maintenance manager
- A single manufacturer: common spare parts and reduced stock.
- Staff know a single unit: faster training and diagnostics.
- The same planned maintenance on every machine.
- MARSE technical service.
Technical keys
- A single manufacturerThe whole plant standardised with MARSE.
- Two technologiesDirect cooling and tank, depending on the machine.
- Installed base renewedRecently renewed, once again with MARSE.
- More than 15 yearsA relationship that lasts.
Result
Frequently asked questions
Why standardise the temperature control units of an injection moulding plant?
Because with a single manufacturer every machine is operated in the same way, the spare parts are common and maintenance is planned in the same way.
Which temperature control units does this plant have?
More than 100 MARSE direct-cooling and tank temperature control units, recently renewed.
How long has the customer been working with MARSE?
More than 15 years.
Equipment and technology
Other success stories

A 1997 MARSE MTR-36 comes back to the factory
View case →
Preheating several moulds at once with a 72 kW SMART 6
View case →