Temperature control units without display integrated into a flexographic printing and lamination line
Each roller of a flexographic printing and lamination line needs its own temperature. Four MARSE temperature control units without display, one per circuit, were integrated into the machine and send their signals to the line control through a 24-pin connector: everything is operated from the main machine's screen.
- Units
- 4 temperature control unitsone per roller circuit
- Version
- No displayintegrated into the machine
- Connection
- 24 pinssignals to the line control
- Operation
- A single HMIthat of the main machine

The case at a glance
- Units
- 4 MARSE temperature control units without display, one per roller.
- Integration
- 24-pin connector to the line control.
- Operation
- From the main machine's screen.
- Functions
- Setpoints, start and stop, status and alarms of each unit.
The process and the initial problem
In a flexographic printing and lamination line, the temperature of each roller affects ink transfer, drying, adhesive activation, adhesion between layers and the dimensional stability of the film. Each zone has its own setpoint, which changes with speed, material or adhesive.
With independent temperature control units, each with its own panel, the operator has to go from unit to unit and the setpoints can drift out of line with the machine recipe. The solution is for the line manufacturer to control the temperature control units from its own control system.
Challenge and solution
Roller temperature affects ink transfer, drying, adhesion between layers and film stability.

- Zones with different temperatures on the same line
- Lamination, calender, drying and cooling rollers
- Quick changes of speed, material or adhesive

- One temperature control unit per circuit, independent adjustment per zone
- Version without display, controlled by external signals
- The machine sends setpoints and receives status and alarms
Why MARSE temperature control units in this case
For the process engineer
- One temperature control unit per roller: each zone at its own temperature, adjusted separately.
- The setpoints are part of the line recipe, together with speed, tension or adhesive.
- No setpoint changes at the unit: the process is repeatable.
For the maintenance manager
- Version without display: fewer exposed controls and more compact units.
- Status and alarms of each temperature control unit visible on the line's screen.
- Connection via a 24-pin connector: a unit is easy to replace.
- Same model in all four positions: common spare parts.
Technical keys
- One unit per rollerEach zone of the line at its own temperature.
- No displayThe temperature control units are controlled from the machine.
- 24-pin connectorSignals from each unit to the line control.
- A single HMITemperatures, start/stop and alarms from the main machine.
Result
Frequently asked questions
Can a temperature control unit be controlled from the main machine?
Yes. In this case four MARSE temperature control units without display send and receive their signals from the line control through a 24-pin connector.
Why one temperature control unit per roller?
Because each roller needs its own temperature according to its function: lamination, calendering, drying or cooling.
What is the advantage of the version without display?
It integrates into the machine and is controlled from its HMI, with no additional control panels.
Equipment and technology
Other success stories

Four SMART W TS integrated into an extruder
View case →
Grinding a drum over 2 m long, already expanded
View case →