Temperature control units for an extruder: four SMART W TS integrated into a 70 kg/h line
An extruder of about 70 kg/h needed to control the temperature of four circuits without taking up space around the line. Four MARSE SMART W TS water temperature control units rated up to 90 °C were mounted directly on its base frame, one per circuit.
- Units
- 4 temperature control unitsSMART W TS
- Temperature
- 30 – 90 °Cwater
- Extruder
- ≈ 70 kg/houtput
- Mounting
- On the base frameintegrated into the machine

The case at a glance
- Machine
- Extruder of about 70 kg/h.
- Units
- 4 MARSE SMART W TS temperature control units, one per circuit.
- Range
- Water from 30 to 90 °C.
- Unit data
- 6–9 kW heating, 60 l/min pump at 3.8–5.8 bar, 77–109 kW cooling.
- Mounting
- Integrated into the extruder's base frame.
The process and the initial problem
In extrusion, several zones of the line need different, stable temperatures so that the material always melts, is conveyed and is shaped in the same way. Each circuit needs its own setpoint and its own control.
On a compact line there is no room for stand-alone temperature control units around the machine, with their hoses crossing the aisle. The solution was to integrate them into the base frame itself, lined up and with the control panel in the operator's view.
Challenge and solution
Each circuit with its own temperature control unit, within the extruder's own footprint.
- Several circuits with independent temperatures
- Little free space around the line
- Units the operator must be able to see and operate easily
- Four SMART W TS, one per circuit
- Mounted in a row on the extruder's base frame
- Screen and emergency stop on the front of each unit
Why MARSE temperature control units in this case
For the process engineer
- One temperature control unit per circuit: each zone with its own setpoint, independent of the others.
- 77–109 kW of cooling per unit to remove the process heat.
- 7″ touch screen with temperature, pressure and flow graphs.
For the maintenance manager
- Integrated into the base frame: short hoses and a tidy line.
- Four identical units: common, interchangeable spare parts.
- Emergency stop and screen on the front of each unit.
- Alarms per unit to locate any fault.
Technical keys
- One unit per circuitEach circuit with its own setpoint and control.
- Integrated into the machineThe four units sit on the base frame.
- Water from 30 to 90 °CThe range of the SMART W TS.
- Controls in viewTouch screen and emergency stop on the front.
Result
Frequently asked questions
Which temperature control units are used on this extruder?
Four MARSE SMART W TS water units rated up to 90 °C, one per circuit, integrated into the base frame.
What are the specifications of each SMART W TS?
Between 6 and 9 kW of heating, a 60 l/min pump at 3.8–5.8 bar, 77–109 kW of cooling and a 7″ touch screen.
Why integrate the temperature control units into the base frame?
So as not to take up space around the line, to shorten hoses and to keep the controls in the operator's view.
Equipment and technology
Other success stories

Grinding a drum over 2 m long, already expanded
View case →
Cleanroom reactors without exceeding their maximum pressure
View case →